Hrvatski
EUR €
ARRI M18 M-Series
The M18 is an 1,800 W open-face lamphead, combining the innovative True Blue desing with the Academy Scientific and Engineering Awardwinning lens-less optical technology of the ARRIMAX. The result is an extremely powerful lamphead, as small as a 1,200 W PAR lamphead but with a 70 % higher light output. The M-Series M18 fixture is adjustable from 15° to 58° without requiring spread lenses.
- Kategorija
- HMI
- Serija
- M-Series
- Model
- M-Series M18
- Reflektor
- MAX Technology reflektor izrađen od aluminija visoke čistoće
- Vrsta lampe
- Metal Halide 1,800 W/SE Metal Halide 1,200 W/SE
- Potrošnja energije
- 1200 / 1800 W
- Podnožje lampe
- G38
- Promjer leće / UV zaštitnog stakla u mm
- 276 mm
- Promjer pribora u mm
- 330 mm
- Klasa zaštite / IP ocjena
- 1 / IP 23
- Certifikati
- CE, UKCA, CB, ENEC, cNRTLus
- Maks. temperatura površine.
- 160 ºC
- Maks. temperatura okoline.
- 45 ºC
- Min. udaljenost od osvijetljenog objekta.
- 7 m
- Min. udaljenost od zapaljivog objekta.
- 1m
97400
Korišteno
16 drugi proizvodi u istoj kategoriji:
In Stock
High-intensity, variablebeam Fresnel spotlight. Light output approximately that of a 5KW filtered tungsten source.
In Stock
Lamp Housing without Bulb
(purple grey & silver color)
4-leaf Rotatable Barndoor
with Safety Wire
Ø500mm (19-5/8 in.) Fresnel Lens
Inlet Cable with Multi-Pin Connector
Stirrup with Ø28mm (1-1/8 in.) Spigot
In Stock
High efficiency and even light distribution has always been ARRI's highest objective. Whenever a lightweight fresnel spotlight using daylight characteristics with compact size and high efficiency is needed the Fresnel lampheads of ARRI like the True Blue D-Series and the discontinued Compact range are the preferred choice. Using short focal length lenses...
In Stock
The M90 closes the gap between M40 and ARRIMAX 18/12, which sits almost exactly in the middle between the two. The unit is focusable from 15° up to 49° just by turning the focus knob, producing a remarkably even light field and a crisp, clear shadow. The elimination of spread lenses speeds up the workflow on set.
In Stock
This is the Arri HMI M40/25 Set 4kW, the strong version of the M40 equipped with a 4KW lamp. You need a 32AH power on set to run it in this wattage. The Arri M series combines optimized weight and lightoutput with smaller size and more felxibility. You can use two different lamps inside one fixture. This gives you more variety of lightoutput on set. The...